| OLI Studio: ScaleChem 结垢分析软件培训内容 |
| 2021-10-18 |
OLI Studio: ScaleChem 结垢分析软件的标准培训内容如下：
Chapter 1 - Introduction to ScaleChem
This is a General Introduction chapter that participants can view in advance or following the course.
Chapter 2 - Creating a New Brine and Scale Calculation
Participants will learn the basics of entering a brine analysis and calculating a scale tendency. Some of the key elements taught, are to distinguish among the three reconciliation options and to consider scaling as a function of production rate at standard conditions.
Chapter 3 - Entering a Gas Analysis
Participants will enter a gas analysis and calculate water saturation in the gas.
Chapter 4 - Reservoir Saturation
Participants will learn how to set the initial solid saturation conditions at certain conditions. This chapter describes the merits of assuming equilibrium saturation between solids and the contacting waters.
Chapter 5 - Contour Diagrams
Participants will calculate scaling tendencies and other variable using a different approach, which shows results with contour diagrams.
Chapter 6 - Building a New Case
Having some experience with building a well, participants will build a new case from the ground up.
Chapter 7 - Facilities
Participants will learn how to use the advanced facilities application. This application allows users to create simple process flow scenarios.
Chapters 8 - Oil Well
Participants will learn how to add an oil analysis, including a distillation assay and pseudocomponents.
Chapter 10 - Alkalinity
Participants will run several calculations pertaining to Alkalinity. This chapter reinforces the importance of Alkalinity to the properties of a produced water and its impact on overall mineral scale potential.
Chapter 11 through 20 - Example Applications
These chapters cover real world examples, and the challenges faced when trying to recreate the chemistry and flow of the system.
|
| 北京中油奥特科技有限公司 |
|
